Categories
Archive
- Latest Posts
- November 2023
- May 2023
- May 2022
- April 2022
- November 2021
- December 2019
- March 2019
- July 2018
- November 2014
- March 2014
- February 2014
- September 2013
- June 2013
- February 2013
- January 2013
- September 2012
- August 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
22
April
A frequent question is "what is the best way to tie strings on the tuner shafts?". Well, as with most things there is no one way to do it, but here are some recommendations which work and will stop strings from slipping.
On a classical guitar run the strings as shown in the diagram and hold the loose end while you tighten it. This works with all classical guitar strings. Two or three full turns should be enough for the 4th to 6th strings and three or four turns for the 1st to 3rd strings. The diagram shows the left side of the headstock where the tuners should be rotated anticlockwise. On the right side the tuners should be rotated clockwise.
To achieve the best path for your strings from tuner to nut position make a conscious effort to tighten the strings so they follow the pattern to the right of the diagram and avoid the string touching any part of the headstock itself.
On steel string guitars just follow the stringing diagram, holding and pulling upwards the loose end of ...
Read more